Bridge Type
Main Span(s): Steel [3] Stringer/Multi-beam or girder [02]
Approach Span(s): Concrete [1] Tee beam [04]
Deck: Concrete Cast-in-Place [1] with Wearing Surface:
Bridge Dimensions
Length: 43.3 m = 142.1 ft
Main Spans: 1 at 14.8 m = 48.6 ft
Approach Spans: 2
Skew: 0
Width, Roadway: 8.5 m = 27.9 ft (2 Lanes) and Out-To-Out: 10.1 m = 33.1 ft for a 7.3 m = 24.0 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A
Location
Trussville [76944]: Jefferson County [073], Alabama [01]
Owned by County Highway Agency [02], DOT District: 3
2.0 MILE SE TRUSSVILLE
Condition
Deck: Good [7]
Superstructure: Good [7]
Substructure: Good [7]
Loading
Design: M 18 / H 20 [4]
Operating: 44.2 metric ton = 48.6 tons (Load Factor(LF) [1])
Inventory: 26.5 metric ton = 29.2 tons (Load Factor(LF) [1])
Appraisal
Structural: Equal to present minimum criteria [6]
Deck Geometry: Basically intolerable requiring high priority of replacement [2]
Road Alignment: Better than present minimum criteria [7]
Waterway: N/A [N] and Bridge not over waterway. [N]
Inspections
Date: December 2020 [1220] and Frequency: 24
Future Work
Work Needed: Bridge rehabilitation because of general structure deterioration or inadequate strength. [35]
Bridge Detour: 2.3 km = 1.4 mi
Traffic
ADT: 7613 (2020) and Trucks: 7%
Future ADT: 9036 (In 2040
)
