AMSTERDAM ROAD over HULLS CREEK (Route: 0)
Num:7544588x
Open: no restriction [A]
Built: 2006, Reconstructed: N/A [0000]
Historic: Historical significance is not determinable at this time. [4]

Google Streetview (If Available)

Rough Distance: 0 Miles (0 Kilometers)

Bridge Type
Main Span(s): Prestressed concrete [5] Box beam or girders - Multiple [05]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Bituminous [6]

Bridge Dimensions
Length: 13.1 m = 43.0 ft
Main Spans: 1 at 12.8 m = 42.0 ft
Approach Spans: 0
Skew: 15
Width, Roadway: 8.5 m = 27.9 ft (2 Lanes) and Out-To-Out: 8.5 m = 27.9 ft for a 6.1 m = 20.0 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Dinsmore [22050]: Shelby County [149], Ohio [39]
Owned by County Highway Agency [02], DOT District: 7
.35 M.W. S.HIGHLAND KIES

Condition
Deck: Very Good [8]
Superstructure: Very Good [8]
Substructure: Very Good [8]
Loading
Design: MS 18+Mod / HS 20+Mod [6]
Operating: 55.1 metric ton = 60.6 tons (Load and Resistance Factor Rating (LRFR) rating reported by rating factor (RF) method using HL-93 loadings [8])
Inventory: 42.1 metric ton = 46.3 tons (Load and Resistance Factor Rating (LRFR) rating reported by rating factor (RF) method using HL-93 loadings [8])

Appraisal
Structural: Equal to present desirable criteria [8]
Deck Geometry: Equal to present minimum criteria [6]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present desirable criteria [8] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: May 2020 [0520] and Frequency: 12

Future Work
Work Needed:
Bridge Detour: 0.5 km = 0.3 mi
Traffic
ADT: 176 (2015) and Trucks: 7%
Future ADT: 244 (In 2038 )

CR-52 over IR 75 (Route: 0)
Num:7502494x
Posted for load [P]
Built: 1962, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.2 Miles (0.4 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 70.1 m = 230.0 ft
Main Spans: 4 at 21.3 m = 69.9 ft
Approach Spans: 0
Skew: 0
Width, Roadway: 8 m = 26.2 ft (2 Lanes) and Out-To-Out: 9.2 m = 30.2 ft for a 8.5 m = 27.9 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Dinsmore [22050]: Shelby County [149], Ohio [39]
Owned by State Highway Agency [01], DOT District: 7
1MI.S.OF JCT. SR-274

Condition
Deck: Very Good [8]
Superstructure: Very Good [8]
Substructure: Very Good [8]
Loading
Design: M 9 / H 10 [1]
Operating: 32.4 metric ton = 35.6 tons (Load Factor (LF) rating reported by rating factor (RF) method using MS18 loading [6])
Inventory: 19.4 metric ton = 21.3 tons (Load Factor (LF) rating reported by rating factor (RF) method using MS18 loading [6])

Appraisal
Structural: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: N/A [N] and Bridge not over waterway. [N]
Inspections
Date: August 2020 [0820] and Frequency: 12

Future Work
Work Needed:
Bridge Detour: 0.5 km = 0.3 mi
Traffic
ADT: 176 (2015) and Trucks: 7%
Future ADT: 50426 (In 2038 )