OR 238 (HWY 272) over APPLEGATE RIVER (MURPHY) (Route: 238)
Num:17363 272 00614x
Open: no restriction [A]
Built: 2004, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0 Miles (0 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Monolithic Concrete (concurrently placed with structural deck) [1]

Bridge Dimensions
Length: 136 m = 446.2 ft
Main Spans: 3 at 52 m = 170.6 ft
Approach Spans: 0
Skew: 0
Width, Roadway: 13.2 m = 43.3 ft (2 Lanes) and Out-To-Out: 14 m = 45.9 ft for a 13.2 m = 43.3 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Unknown [00000]: Josephine County [033], Oregon [41]
Owned by State Highway Agency [01], DOT District: 8
00.3 S MURPHY POST OFFICE

Condition
Deck: Satisfactory [6]
Superstructure: Good [7]
Substructure: Good [7]
Loading
Design: HL93 [A]
Operating: 41.8 metric ton = 46.0 tons (Load and Resistance Factor Rating (LRFR) rating reported by rating factor (RF) method using HL-93 loadings [8])
Inventory: 32.1 metric ton = 35.3 tons (Load and Resistance Factor Rating (LRFR) rating reported by rating factor (RF) method using HL-93 loadings [8])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present desirable criteria [8] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: October 1999 [1099] and Frequency: 24

Future Work
Work Needed:
Bridge Detour: 5.1 km = 3.2 mi
Traffic
ADT: 6200 (2018) and Trucks: 12%
Future ADT: 7400 (In 2038 )

SOUTHSIDE ROAD over MURPHY CREEK (Route: 0)
Num:33C10 392000387x
Open: no restriction [A]
Built: 1966, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.4 Miles (0.7 Kilometers)

Bridge Type
Main Span(s): Steel [3] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Bituminous [6]

Bridge Dimensions
Length: 9.4 m = 30.8 ft
Main Spans: 1 at 8.5 m = 27.9 ft
Approach Spans: 0
Skew: 24
Width, Roadway: 8.5 m = 27.9 ft (2 Lanes) and Out-To-Out: 10.2 m = 33.5 ft for a 9.8 m = 32.2 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Unknown [00000]: Josephine County [033], Oregon [41]
Owned by County Highway Agency [02], DOT District: 8
JOSEPHINE CO

Condition
Deck: Good [7]
Superstructure: Good [7]
Substructure: Fair [5]
Loading
Design: MS 18 / HS 20 [5]
Operating: 80.7 metric ton = 88.8 tons (Load Factor(LF) [1])
Inventory: 49 metric ton = 53.9 tons (Load Factor(LF) [1])

Appraisal
Structural: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present minimum criteria [6] and "Bridge with ""unknown"" foundation that has not been evaluated for scour. [U]"
Inspections
Date: October 2020 [1020] and Frequency: 24

Future Work
Work Needed:
Bridge Detour: 0.3 km = 0.2 mi
Traffic
ADT: 1683 (2020) and Trucks: 10%
Future ADT: 1958 (In 2025 )