MILL ST over ERIE BARGE CANAL (Route: 0)
Num:4426040x
Open: no restriction [A]
Built: 1992, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.1 Miles (0.1 Kilometers)

Bridge Type
Main Span(s): Steel [3] Truss - Thru [10]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 73.2 m = 240.2 ft
Main Spans: 1 at 71.6 m = 234.9 ft
Approach Spans: 0
Skew: 0
Width, Roadway: 9.1 m = 29.9 ft (2 Lanes) and Out-To-Out: 11.4 m = 37.4 ft for a 9.1 m = 29.9 ft approaching roadway.
Vertical Clearance: 5.08 m = 16.7 ft and Navigational Clearance: 6.4 m = 21.0 ft

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
OVER BARGE CANAL S ROME

Condition
Deck: Good [7]
Superstructure: Very Good [8]
Substructure: Good [7]
Loading
Design: MS 18 / HS 20 [5]
Operating: 69.9 metric ton = 76.9 tons (Load Factor(LF) [1])
Inventory: 35.4 metric ton = 38.9 tons (Load Factor(LF) [1])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Meets minimum tolerable limits to be left in place as is [4]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present minimum criteria [6] and Bridge foundations (including piles) on dry land well above flood water elevations. [9]
Inspections
Date: October 2020 [1020] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.6 km = 0.4 mi
Traffic
ADT: 4879 (2016) and Trucks: 4%
Future ADT: 6036 (In 2039 )

RTE 26 over MARTIN STREET: CSX TRANS (Route: 26)
Num:1018862x
Open: no restriction [A]
Built: 1996, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.3 Miles (0.5 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 93 m = 305.1 ft
Main Spans: 2 at 45.7 m = 149.9 ft
Approach Spans: 0
Skew: 21
Width, Roadway: 11 m = 36.1 ft (2 Lanes) and Out-To-Out: 11.8 m = 38.7 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
0.4 MI S JCT RTE 49+26

Condition
Deck: Good [7]
Superstructure: Very Good [8]
Substructure: Good [7]
Loading
Design: MS 22.5 / HS 25 or greater [9]
Operating: 89.8 metric ton = 98.8 tons (Load Factor(LF) [1])
Inventory: 44.5 metric ton = 49.0 tons (Load Factor(LF) [1])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Equal to present minimum criteria [6]
Road Alignment: Equal to present desirable criteria [8]
Waterway: N/A [N] and Bridge not over waterway. [N]
Inspections
Date: September 2020 [0920] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.1 km = 0.1 mi
Traffic
ADT: 9016 (2017) and Trucks: 6%
Future ADT: 9058 (In 2039 )

RTE 26 over MARTIN STREET: CSX TRANS (Route: 26)
Num:1018861x
Open: no restriction [A]
Built: 1997, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.3 Miles (0.5 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 93 m = 305.1 ft
Main Spans: 2 at 45.7 m = 149.9 ft
Approach Spans: 0
Skew: 21
Width, Roadway: 10.8 m = 35.4 ft (2 Lanes) and Out-To-Out: 11.8 m = 38.7 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
0.4 MI S JCT RTS 49 & 26

Condition
Deck: Satisfactory [6]
Superstructure: Good [7]
Substructure: Good [7]
Loading
Design: MS 22.5 / HS 25 or greater [9]
Operating: 89.8 metric ton = 98.8 tons (Load Factor(LF) [1])
Inventory: 44.5 metric ton = 49.0 tons (Load Factor(LF) [1])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: N/A [N] and Bridge not over waterway. [N]
Inspections
Date: November 1999 [1199] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.1 km = 0.1 mi
Traffic
ADT: 2478 (2015) and Trucks: 8%
Future ADT: 2489 (In 2039 )

RTE 26 over E. WHITESBORO ST: BARGE (Route: 26)
Num:4018872x
Open: no restriction [A]
Built: 1996, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.4 Miles (0.6 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 180.4 m = 591.9 ft
Main Spans: 4 at 50.9 m = 167.0 ft
Approach Spans: 0
Skew: 12
Width, Roadway: 10.8 m = 35.4 ft (2 Lanes) and Out-To-Out: 11.8 m = 38.7 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 30.17 m = 99.0 ft and Navigational Clearance: 11.5 m = 37.7 ft

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
0.6 MI S JCT RTE 46+26

Condition
Deck: Good [7]
Superstructure: Very Good [8]
Substructure: Good [7]
Loading
Design: MS 22.5 / HS 25 or greater [9]
Operating: 79.8 metric ton = 87.8 tons (Load Factor(LF) [1])
Inventory: 48.1 metric ton = 52.9 tons (Load Factor(LF) [1])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present minimum criteria [6] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: June 2020 [0620] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.6 km = 0.4 mi
Traffic
ADT: 9016 (2017) and Trucks: 6%
Future ADT: 9058 (In 2039 )

RTE 26 over E.WHITESBORO ST: CANAL (Route: 26)
Num:4018871x
Open: no restriction [A]
Built: 1997, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.4 Miles (0.7 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 173.7 m = 569.9 ft
Main Spans: 4 at 50.9 m = 167.0 ft
Approach Spans: 0
Skew: 12
Width, Roadway: 10.9 m = 35.8 ft (2 Lanes) and Out-To-Out: 11.8 m = 38.7 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 11.5 m = 37.7 ft

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
0.6 MI S JCT RTS 46 & 26

Condition
Deck: Good [7]
Superstructure: Very Good [8]
Substructure: Good [7]
Loading
Design: MS 22.5 / HS 25 or greater [9]
Operating: 78 metric ton = 85.8 tons (Load Factor(LF) [1])
Inventory: 47.2 metric ton = 51.9 tons (Load Factor(LF) [1])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Equal to present desirable criteria [8] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: June 1999 [699] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.6 km = 0.4 mi
Traffic
ADT: 9016 (2017) and Trucks: 6%
Future ADT: 9058 (In 2039 )

RTE 26 over RTE 365 (Route: 26)
Num:1018850x
Open: no restriction [A]
Built: 2013, Reconstructed: N/A [0000]
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.5 Miles (0.8 Kilometers)

Bridge Type
Main Span(s): Steel [3] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Integral Concrete (separate non-modified layer of concrete added to structural deck) [2]

Bridge Dimensions
Length: 16.8 m = 55.1 ft
Main Spans: 1 at 14.9 m = 48.9 ft
Approach Spans: 0
Skew: 2
Width, Roadway: 8.2 m = 26.9 ft (1 Lanes) and Out-To-Out: 9.1 m = 29.9 ft for a 8.2 m = 26.9 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Rome [63418]: Oneida County [065], New York [36]
Owned by State Highway Agency [01], DOT District: 26
.6 MI W JCT SH233 & SH 69

Condition
Deck: Very Good [8]
Superstructure: Excellent [9]
Substructure: Excellent [9]
Loading
Design: HL93 [A]
Operating: 71.7 metric ton = 78.9 tons (Load Factor(LF) [1])
Inventory: 42.6 metric ton = 46.9 tons (Load Factor(LF) [1])

Appraisal
Structural: Superior to present desirable criteria [9]
Deck Geometry: Basically intolerable requiring high priority of replacement [2]
Road Alignment: Equal to present desirable criteria [8]
Waterway: N/A [N] and Bridge not over waterway. [N]
Inspections
Date: May 1999 [599] and Frequency: 24

Future Work
Work Needed: Widening of existing bridge with deck rehabilitation or replacement. [34]
Bridge Detour: 0.3 km = 0.2 mi
Traffic
ADT: 10793 (2016) and Trucks: 7%
Future ADT: 13469 (In 2039 )