Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Concrete [1] Slab [01]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Epoxy Overlay [5]
Bridge Dimensions
Length: 130.5 m = 428.2 ft
Main Spans: 3 at 45.7 m = 149.9 ft
Approach Spans: 1
Skew: 0
Width, Roadway: 12 m = 39.4 ft (3 Lanes) and Out-To-Out: 15.5 m = 50.9 ft for a 11.9 m = 39.0 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 3.7 m = 12.1 ft
Location
Orofino [59320]: Clearwater County [035], Idaho [16]
Owned by State Highway Agency [01], DOT District: 2
IN OROFINO
Condition
Deck: Good [7]
Superstructure: Good [7]
Substructure: Satisfactory [6]
Loading
Design: MS 22.5 / HS 25 or greater [9]
Operating: 73.5 metric ton = 80.9 tons (Load Factor(LF) [1])
Inventory: 43.5 metric ton = 47.9 tons (Load Factor(LF) [1])
Appraisal
Structural: Equal to present minimum criteria [6]
Deck Geometry: Meets minimum tolerable limits to be left in place as is [4]
Road Alignment: Equal to present minimum criteria [6]
Waterway: Equal to present desirable criteria [8] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: October 1999 [1099] and Frequency: 48
Future Work
Work Needed: Replacement of bridge or other structure because of substandard load carrying capacity or substantial bridge roadway geometry. [31]
Bridge Detour: 3.2 km = 2.0 mi
Traffic
ADT: 3500 (2019) and Trucks: 15%
Future ADT: 5250 (In 2039
)