WABASH ROAD over WABASH RIVER (Route: 0)
Num:5459850x
Posted for load [P]
Built: 1993, Reconstructed: N/A [0000]
Historic: Historical significance is not determinable at this time. [4]

Google Streetview (If Available)

Rough Distance: 0 Miles (0 Kilometers)

Bridge Type
Main Span(s): Steel [3] Truss - Thru [10]
Approach Span(s): Other [00]
Deck: Corrugated Steel [6] with Wearing Surface: Bituminous [6]

Bridge Dimensions
Length: 33.2 m = 108.9 ft
Main Spans: 1 at 32 m = 105.0 ft
Approach Spans: 0
Skew: 0
Width, Roadway: 8.5 m = 27.9 ft (2 Lanes) and Out-To-Out: 8.5 m = 27.9 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Washington [81452]: Mercer County [107], Ohio [39]
Owned by County Highway Agency [02], DOT District: 7
S OF SR219 0.2 MI

Condition
Deck: Satisfactory [6]
Superstructure: Poor [4]
Substructure: Good [7]
Loading
Design: MS 18+Mod / HS 20+Mod [6]
Operating: 42.1 metric ton = 46.3 tons (Allowable Stress (AS) rating reported by rating factor (RF) method using MS18 loading [7])
Inventory: 25.9 metric ton = 28.5 tons (Allowable Stress (AS) rating reported by rating factor (RF) method using MS18 loading [7])

Appraisal
Structural: Meets minimum tolerable limits to be left in place as is [4]
Deck Geometry: Somewhat better than minimum adequacy to tolerate being left in place as is [5]
Road Alignment: Equal to present desirable criteria [8]
Waterway: Superior to present desirable criteria [9] and Bridge foundations (including piles) on dry land well above flood water elevations. [9]
Inspections
Date: September 2020 [0920] and Frequency: 12

Future Work
Work Needed:
Bridge Detour: 0.6 km = 0.4 mi
Traffic
ADT: 984 (2015) and Trucks: 8%
Future ADT: 1366 (In 2038 )

SR-219 over WABASH RIVER (Route: 219)
Num:5403006x
Open: no restriction [A]
Built: 1965, Reconstructed: 2012
Historic: Bridge is not eligible for the NRHP. [5]

Google Streetview (If Available)

Rough Distance: 0.4 Miles (0.6 Kilometers)

Bridge Type
Main Span(s): Steel continuous [4] Stringer/Multi-beam or girder [02]
Approach Span(s): Other [00]
Deck: Concrete Cast-in-Place [1] with Wearing Surface: Monolithic Concrete (concurrently placed with structural deck) [1]

Bridge Dimensions
Length: 53.2 m = 174.5 ft
Main Spans: 3 at 19.8 m = 65.0 ft
Approach Spans: 0
Skew: 35
Width, Roadway: 11 m = 36.1 ft (2 Lanes) and Out-To-Out: 11 m = 36.1 ft for a 11 m = 36.1 ft approaching roadway.
Vertical Clearance: 99.99 m = 328.1 ft and Navigational Clearance: 0 = N/A

Location
Washington [81452]: Mercer County [107], Ohio [39]
Owned by State Highway Agency [01], DOT District: 7
1.24MI.E.OF JCT. SR-49

Condition
Deck: Very Good [8]
Superstructure: Good [7]
Substructure: Good [7]
Loading
Design: MS 18+Mod / HS 20+Mod [6]
Operating: 68 metric ton = 74.8 tons (Load Factor (LF) rating reported by rating factor (RF) method using MS18 loading [6])
Inventory: 42.1 metric ton = 46.3 tons (Load Factor (LF) rating reported by rating factor (RF) method using MS18 loading [6])

Appraisal
Structural: Better than present minimum criteria [7]
Deck Geometry: Better than present minimum criteria [7]
Road Alignment: Better than present minimum criteria [7]
Waterway: Better than present minimum criteria [7] and Bridge foundations determined to be stable for the assessed or calculated scour condition. [8]
Inspections
Date: August 2020 [0820] and Frequency: 12

Future Work
Work Needed:
Bridge Detour: 2.7 km = 1.7 mi
Traffic
ADT: 938 (2015) and Trucks: 9%
Future ADT: 1302 (In 2038 )