HistoricBridges.org Menu: HistoricBridges.org Menu:


We Recommend:
Bach Steel - Experts at historic truss bridge restoration.

HistoricBridges.org: Bridge Browser

4th Street Bridge

Allen County Bridge 525

4th Street Bridge

Primary Photographer(s): Nathan Holth and Rick McOmber

Bridge Documented: June 3, 2012

View Photos
and Videos
View Maps
and Links

Facility Carried / Feature Intersected
4th Street Over Spy Run Creek
Location
Fort Wayne: Allen County, Indiana: United States
Construction Date and Builder / Engineer
1921 By Builder/Contractor: Herman Tapp Construction Company of Fort Wayne, Indiana and Engineer/Design: Asa Waters Grosvenor of Fort Wayne, Indiana
Rehabilitation Date
Not Available or Not Applicable
Main Span Length
55.0 Feet (16.8 Meters)
Structure Length
65.0 Feet (19.8 Meters)
Roadway Width
30 Feet (9.14 Meters)
Spans
1 Main Span(s)
Inventory Number
200261

Historic Significance Rating (HSR)
View Information About HSR Ratings

Bridge Documentation

View Archived National Bridge Inventory Report - Has Additional Details and Evaluation

View Historical Biographies Discussing Asa Waters Grosvenor

View A Historical Article About The Construction of the Similar Harrison Street Bridge

This bridge is a late but rare example of a concrete arch bridge using the Melan style of reinforcing. Melan reinforcing uses solid steel arch ribs (either rolled or built-up) embedded in concrete to providing a reinforcing system as opposed to the network of steel rods (rebar) used in the majority of reinforced concrete bridges. Melan arch bridges were more common in the earlier years of concrete arch bridge construction. Examples from after 1915 like this one were uncommon. However, Asa Waters Grosvenor, who designed many of Fort Wayne's concrete arch bridges, appears to have had an affinity for Melan reinforcing. Grosvenor's Melan arch bridges used steel ribs that were built-up latticed beams. While the small 4th Street Bridge likely did not receive much attention in the engineering community, an earlier and larger (and now demolished and replaced) bridge on Harrison Street in Fort Wayne was also designed by Grosvenor. An article about this bridge included a photo, shown to the right, which shows the Melan reinforcing laid out on the falsework, awaiting the concrete pour.

The 4th Street Bridge bridge is in good physical condition overall. However, there is some spalling that, while undesirable, is of interest to understanding the bridge because it has revealed the bottom of some of the Melan reinforcing. The photo to the left shows the exposed sections of a couple of the ribs.

This bridge retains original concrete balustrade railings. Lighting was originally mounted on top of the railings, but this has been removed. This bridge originally had a beautiful brick deck that has been overlayed with asphalt. Suggested future preservation work is to repair the spalling on the arch, restore the bridge so it again displays a brick deck, and reinstall replica lighting on the bridge.

Information and Findings From DHPA Historic Bridge Survey

Statement of Significance

This rather late Grosvenor design appears to be rather conventional in form and modestly decorated. The bridge does retain its architectural integrity.

The Herman Tapp Construction Company of Fort Wayne won the contract to build this 65', single-span structure. The ring is segmental and probably uses the Melan system of reinforcing. Solid spandrel walls retain the earth fill that carries the 30' asphalt roadway between concrete sidewalks and rails.

Architectural Description

A.W. Grosvenor of Fort Wayne designed a number of concrete arches which different contractors built in and around Allen County in the second decade of the 20th Century. About half a dozen bridges he designed have survived.

Other Information

In the second decade of the twentieth century, A. W. Grosvenor of Fort Wayne designed about a half-dozen reinforced-concrete arched structures built in the region. In June 1919, four firms bid to build the Fourth Street Bridge. Two proposed a steel-truss structure on Rochester Bridge Company plans. Offering the lowest bid to built on the Grosvenor plans, the Herman Tapp Construction Company of Fort Wayne won a contract from the commissioners at $20,990. The arch ring is segmental with a 13-foot rise. "The reinforcement will consist of the Melan type of riveted lattice girders imbedded in the concrete of the arch ring." Solid spandrel walls retain the earth fill and originally carried a brick roadway, now covered with asphalt. 5-foot and 10-inch sidewalks flank the roadway and are in turn bordered by coped parapet rails with open-arch panels. This rather late Grosvenor design appears to be rather conventional in form and modestly decorated. The bridge retains its architectural integrity.

References: Butler, Fairman & Seufert, Inc., Bridge Inspection/Reinspection Report: Allen County (Indianapolis, 1973, 1977, 1981). Bridge nameplate. Allen County, "Commissioners Record," 13: 230; 14: 401-402. Allen County, "Old Bridges" (Surveyor's Office), 13E: 14. "Construction News," Engineering News, 7 September 1916: 123; 20 September 1917: 120.

Two bridge plates:
text 1: "Contractor - The Herman Tapp Construction Co. Engineer A.W.Grosvenor"
text 2: "1921 / Allen County Commissioners - A.J. Baker, Frank J. Poirson, Gust F. Hilgeman"

Currently part of Lawton Park; east side of bridge is located just after the entry to the park, with a wall and stone entrance piers. Lawton Park was established in 1866 and called Northside Park until the turn of the century.

Bridge Considered Historic By Survey: Yes


This bridge is tagged with the following special condition(s): Melan

Divider

Photo Galleries and Videos: 4th Street Bridge

 

View Photo Gallery

Bridge Photo-Documentation

Original / Full Size Photos
A collection of overview and detail photos. This gallery offers photos in the highest available resolution and file size in a touch-friendly popup viewer.
Alternatively, Browse Without Using Viewer

Divider

View Photo Gallery

Bridge Photo-Documentation

Mobile Optimized Photos
A collection of overview and detail photos. This gallery features data-friendly, fast-loading photos in a touch-friendly popup viewer.
Alternatively, Browse Without Using Viewer

Divider

Maps and Links: 4th Street Bridge

Coordinates (Latitude, Longitude):

Search For Additional Bridge Listings:

Bridgehunter.com: View listed bridges within 0.5 miles (0.8 kilometers) of this bridge.

Bridgehunter.com: View listed bridges within 10 miles (16 kilometers) of this bridge.

HistoricBridges.org Bridge Browser: View listed bridges within 0.5 miles (0.8 kilometers) of this bridge.

HistoricBridges.org Bridge Browser: View listed bridges within 10 miles (16 kilometers) of this bridge.

2021 National Bridge Inventory: View listed bridges within 0.5 miles (0.8 kilometers) of this bridge.

Additional Maps:

Google Maps

Google Streetview (If Available)

Bing Maps

OpenStreetMap

GeoHack (Additional Links and Coordinates)

Apple Maps (Via DuckDuckGo Search)

Apple Maps (Apple devices only)

MapQuest

HERE We Go Maps

ACME Mapper

Waze Map

Android: Open Location In Your Map or GPS App

Flickr Gallery (Find Nearby Photos)

Wikimedia Commons (Find Nearby Photos)

Directions Via Sygic For Android

Directions Via Sygic For iOS and Android Dolphin Browser

USGS National Map (United States Only)

Historical USGS Topo Maps (United States Only)

Historic Aerials (United States Only)

CalTopo Maps (United States Only)


Divider
 
Home Top

Divider

About - Contact

© Copyright 2003-2024, HistoricBridges.org. All Rights Reserved. Disclaimer: HistoricBridges.org is a volunteer group of private citizens. HistoricBridges.org is NOT a government agency, does not represent or work with any governmental agencies, nor is it in any way associated with any government agency or any non-profit organization. While we strive for accuracy in our factual content, HistoricBridges.org offers no guarantee of accuracy. Information is provided "as is" without warranty of any kind, either expressed or implied. Information could include technical inaccuracies or errors of omission. Opinions and commentary are the opinions of the respective HistoricBridges.org member who made them and do not necessarily represent the views of anyone else, including any outside photographers whose images may appear on the page in which the commentary appears. HistoricBridges.org does not bear any responsibility for any consequences resulting from the use of this or any other HistoricBridges.org information. Owners and users of bridges have the responsibility of correctly following all applicable laws, rules, and regulations, regardless of any HistoricBridges.org information.

Admin Login

Divider